3D Printing Webinar and Event Roundup: May 12, 2024 - 3DPrint.com

Webinars and occasions are choosing up within the AM {industry} this week! ASTM Worldwide continues its Skilled Certificates Course and Stratasys continues its superior in-person trainings, whereas 3D Methods is holding a number of webinars this week. Speedy.Tech 3D 2024 might be held in Germany, Markforged expertise might be on show throughout open homes and Demo Days, and Materialise shares what’s new in Magics. For particulars on these and lots of different choices, learn on!

3D Printing Information Unpeeled

Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), gives a information livestream one to 2 instances per week known as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Stay and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing {industry} that week, and why they’re vital. A number of the tales in his roundup are ones we’ve coated at 3DPrint.com, and a few are usually not, however they’re all equally fascinating and impactful!

Could 13: ASTM Skilled Certificates Course in AM

ASTM Worldwide’s AM Middle of Excellence (AMCOE) is holding its ninth Skilled Certificates Course in Additive Manufacturing. This complete providing, which ends on June 4th, consists of eight modules over a one-month interval that cowl the complete AM course of chain, offering attendees with a superb mixture of dwell knowledgeable Q&A periods and self-paced studying. Two modules might be coated every week, taught by specialists from academia, {industry}, nationwide labs, and regulatory our bodies. The modules coated in Week 2, which begins Could 13, are Feedstock and Metrology and Publish-Processing; the dwell Q&A session with instructors might be held Could twenty first.

“This course will equip attendees with core technical data associated to widespread AM practices and can permit them to earn a Skilled AM Certificates that can function the inspiration and pre-requisite for incomes future specialised role-based AM certificates by means of the ASTM AM CoE. Attendees will full a multiple-choice examination upon course completion.”

You may register for the course right here.

Could 13 – 16: Stratasys Continues Superior Coaching

This week, Stratasys continues its superior coaching programs at its North American subsidiary headquarters in Minnesota, in addition to at its EMEA headquarters in Germany. First up, “FDM Superior Perception and File Preparation” might be held within the U.S. from Could 13-15, whereas “FDM Superior Operations” might be provided in Baden-Baden from Could 14-15. Lastly, clients of Origin One 3D printing techniques can take “P3 Superior Operations” within the U.S. from Could 14-16.

“You might be in the precise place if you wish to begin or deepen your studying about additive applied sciences and your Stratasys printer.”

Control the occasions calendar for future choices!

Could 14 – 16: Speedy.Tech 3D

The Speedy.Tech 3D additive manufacturing hub is coming to Erfurt Messe in Germany from Could 14-16. That is the twentieth version for the future-oriented AM person convention, providing a specialist congress, loads of networking alternatives, the AM Science Nook, and the awards ceremony for the 3D Pioneers Problem, plus rather more. Loads of well-known names within the {industry} might be exhibiting at Speedy.Tech 3D, together with FIT AG, Formlabs, Stratasys, Arburg Additive, Farsoon, Intamsys, Materialise, Cubicure, and lots of extra. The motto of the occasion, which is aimed toward each customers and builders of AM applied sciences, is “Perceive. See. Expertise.”

“Along with being a broad data platform, Speedy.Tech 3D can also be a artistic assembly place for start-ups in addition to for specialists and {industry} giants of additive manufacturing. The commerce exhibition for all elements of the additive course of chain enhances the high-class and strongly user-oriented congress with appropriate alternatives for networking and trade, e.g. at varied night occasions or on the lecture stage of the 3D Printing Convention.”

You should purchase a ticket for Speedy.Tech 3D 2024 right here.

Could 14: Elevate Your Enterprise with 3D Methods’ SLS

At 5 pm EST on Tuesday, Could 4th, 3D Methods will maintain its first webinar of the week, on “Strategic Success: Elevate Your Enterprise with SLS 3D Printing Benefits.” Three firm specialists will talk about the elemental rules and capabilities of selective laser sintering (SLS) expertise, its key purposes in tooling, speedy manufacturing, and manufacturing, the various vary of supplies appropriate with SLS, 3D Methods’ SLS 3D printers, and extra.

“The occasion will showcase compelling software examples, demonstrating how companies can leverage SLS 3D printing to realize strategic success and drive innovation of their respective industries.”

You may register for the webinar right here.

Could 15 – 16: AWP & Markforged Demo Days

On Could fifteenth and sixteenth, Markforged and Superior World Merchandise (AWP) are having the primary two of their eight deliberate Demo Days Open Homes, that includes the brand new FX10 carbon fiber 3D printer. These free occasions might be held at AWP in Fremont, California, throughout a number of one-hour time slots, and free registration contains Markforged swag and lunch. Attendees will study tips about Eiger and the way to determine 3D printing alternatives, and see dwell demonstrations of the next-generation FX10, together with the X7, Mark Two, Onyx Professional, Onyx One, and large-format carbon fiber/ULTEM FX20 3D printer.

“Expertise the all NEW FX10 Carbon Fiber 3D Printer designed for the Manufacturing unit Ground.”

You may register on your time slot right here. One registrant can carry as much as 5 friends with them.

Could 15: Revolutionizing Thermoforming with 3D Methods

The second 3D Methods webinar this week is about “Revolutionizing Thermoforming: Unleashing Effectivity to Drastically Cut back Mildew Manufacturing Time.” Held at 10 am EST on Wednesday, Could fifteenth, attendees will learn to use the corporate’s pellet extrusion expertise to shorten lead instances and decrease prices for big thermoforming molds. 3D Methods clients have reported pulling hundreds of photographs from molds, 3D printed utilizing pellet extrusion expertise, which have few indicators of wear and tear or degraded efficiency, and may obtain validation as much as 65% quicker with 3D printed molds.

“Thermoforming corporations and producers that utilize thermoformed parts are at the moment underneath immense aggressive strain to enhance manufacturing effectivity, decrease waste, and decrease bills. Concurrently, they’re additionally grappling with a shortage of expert labor.”

You may register for the webinar right here.

Could 15: Meet the Markforged FX10 3D Printer

For those who can’t get to California this week for the Markforged and AWP Demo Days, however nonetheless need to study in regards to the new FX10 printer, you’re in luck! At 11 am EST on the fifteenth, Markforged and 3DOLOGiE are holding a webinar so you possibly can “Meet the Markforged FX10 3D Printer.” Attendees will evaluation machine specs and options, uncover associated software program and supplies, and study why this printer is a flexible instrument for the manufacturing facility flooring.

“The FX10 is Markforged’s latest industrial printer – a fifth era composite machine designed to be productive, dependable, and automatic.”

You may register for the webinar right here.

Could 15: 3D Discuss Present on Oil & Gasoline Sector

Additionally at 11 am EST on the fifteenth, the 3D Discuss Present is again! Introduced by 3YOURMIND, this episode is all about “Additive Manufacturing’s Affect on Ageing Vitality Property.” Throughout this free, one-hour dwell session, attendees will study in regards to the roles and challenges of AM in getting old power property, alternatives for regional improvement of AM to make sure on-demand readiness for the oil & fuel sector, and purposes and case research for oil & fuel inside half identification software program.

“Be a part of us dwell for episode 24 that includes 3D Printing specialists Omar Abuhabaya, CCO of Nationwide Additive Manufacturing and Innovation Firm (NAMI) and former Technical Lead for Additive Manufacturing (AM) at Aramco, Effiong Okwong, VP, Digital Options & AM Adoption at RusselSmith, and Michael Petch, Editor-in-Chief at 3D Printing Business!”

You may register for episode 24 of the 3D Discuss Present right here.

Could 16: What’s New in Materialise Magics

Materialise will share “What’s New in Magics” at 10 am EST on Thursday, Could sixteenth. Attendees will hear from the corporate’s Egwin Bovyn, Product Line Supervisor of Magics 3D Print Suite, and Karel Reynders, Go-To-Market Skilled — Magics, the way to use the brand new Lattice Module to scale back the burden of components, the way to decrease post-processing in metallic sequence manufacturing by means of contactless assist, all in regards to the new darkish theme, and extra.

“This replace to our knowledge and construct preparation software program focuses on attaining first-time-right prints each time, introducing enhancements for each polymer and metallic customers. On this webinar, you’ll see the most recent additions in motion, together with upgrades to the 3D Nester, beam lattices that dramatically cut back your half’s weight, and the extremely requested darkish theme.”

You may register for the webinar right here.

Could 16: Rework Plastic Injection Molds with AddUp’s AM

AddUp will maintain a webinar at 11 am EST on the sixteenth about “Remodeling Plastic Injection Mildew Manufacturing with AM: Harnessing New Materials for Superior High quality Elements and Quicker Builds.” The corporate partnered with Swiss Metal Group to develop a brand new materials, Printdur HCT, primarily based on typical std. instrument metal 1.2083/AISI420. Vishal Katoch, AddUp’s Course of and Manufacturing Engineer, and Dr. Andreas Mohr, High quality and Growth Specialist from Swiss Metal Group, will talk about how pairing this new materials with AddUp’s FormUp 350 PBF printer results in the manufacturing of high-end mildew inserts for plastic injection molding.

“Within the realm of injection molding the standard and efficiency of mildew inserts are of paramount significance to make sure sturdiness and longevity of molds and for prime finish components manufacturing. The creation of tailor-made supplies with optimum mechanical properties, put on resistance, and corrosion resistance for adoption on metallic AM system open doorways for innovation of advanced components by exploiting the design freedom of AM, which isn’t potential by typical manufacturing approaches.”

You may register for the webinar right here.

Could 16: Inexperienced Vitality Developments with Metallic FFF 3D Printing

Additionally on Could sixteenth, however at 12 pm EST, The Digital Foundry will maintain a webinar about “Inexperienced Vitality Developments with FFF Metallic,” delving deep into the most recent improvements which are driving sustainability within the renewable power sector. Matters of debate will embody the fundamentals of metallic Filamet filaments and FFF metallic printing, ammonia manufacturing, nuclear power, how FFF metallic impacts inexperienced power analysis, semiconductors, and extra. There can even be a Q&A portion as effectively.

“Whether or not you’re a seasoned {industry} skilled or just inquisitive about the way forward for inexperienced expertise, this webinar guarantees to ship precious insights and thought-provoking discussions.”

You may register for the webinar right here. You’ll obtain a calendar invitation with a Zoom hyperlink a couple of days later.

Could 16: TPM Lab Excursions

For those who’re in Greenville, South Carolina on Thursday the sixteenth, cease by TPM to take pleasure in “Crafting the Future: A Peek Inside Our Lab.” From 3-6 pm EST, participate in open-door lab excursions and stroll by means of the power at your personal tempo. You’ll get a firsthand take a look at superior AM expertise from 3D Methods, HP, and Markforged, in addition to AMT’s vapor smoothing. It’s also possible to community with fellow expertise fans and innovators in a relaxed setting, and ask TPM’s AM specialists your questions.

“Embark on an explorative journey into the cutting-edge world of additive manufacturing with “Crafting the Future: A Peek Inside Our Lab”. Positioned within the vibrant coronary heart of Greenville, SC, our doorways are vast open so that you can expertise the forefront of 3D printing expertise and innovation.”

You may register for a lab tour right here.

Could 16: 3D Printing for Transportation

The ultimate providing on Thursday, Could sixteenth is the final 3D Methods webinar, “Tech Replace: 3D Printing for Transportation in 2024.” At 5 pm EST, Richard Broad, Product Supervisor Supplies, will give a technical presentation, throughout which attendees will study in regards to the impression of 3D printing on transportation OEMs and tiered suppliers, related purposes corresponding to floor texturing, materials check knowledge for transportation producers, fast onsite implementation purposes like eggshell molding for silicon components, and extra. An viewers Q&A session might be held after the presentation.

“At the moment, OEMs and tiered suppliers face growing strain to introduce improvements in street and rail swiftly. With the proliferation of applied sciences and suppliers in additive manufacturing (or 3D printing) acquiring an summary of the most recent developments poses challenges for designers, engineering heads, operations, and additive manufacturing professionals. Our unique webinar offers you a shortcut to a concise overview of current developments that you could have missed at formnext or AMUG and the place the most recent developments can change the equation for 3D printing.”

You may register for the webinar right here.

Could 17 – 18: UK’s Dental Know-how Showcase

From Could 17-18 in Birmingham, the UK’s solely dental lab-focused occasion, the Dental Know-how Showcase (DTS), will happen. There might be over 50 audio system, 40+ hours of content material, and greater than 80 exhibitors on the occasion, which gives a much-needed place to study, community, and uncover. You may watch demonstrations of vital applied sciences for the dental lab, attend workshops, meet with decision-makers, and take heed to fascinating shows, together with one a couple of newbie’s information to 3D printing for dental technicians.

“Put money into your self at DTS by taking the time to satisfy with forward-thinking suppliers, take heed to industry-accomplished audio system and depart with a foot forward of the rivals.”

You may register for DTS right here.

Could 18: 3D Printing for Orthodontics with SprintRay

Lastly, talking of dental 3D printing, SprintRay is holding a CE webinar at 1 pm EST on Friday, Could seventeenth about “3D Printing for Orthodontics.” Dr. Enrique Cruz, an knowledgeable in digital orthodontics, will talk about the most recent 3D printing {hardware} and superior resins which are reworking in-office orthodontic workflows, and share his journey about integrating 3D printing into his personal follow. Attendees will study the workflow and protocols for fabricating orthodontic home equipment in-office, discover the advantages of in-office orthodontic 3D printing, find out how the expertise can streamline manufacturing of orthodontic fashions and home equipment, and extra.